MR3 Motorized Microtome


  • Heavy base casting to reduce vibration
  • Vertical cutting stroke with solid cross roller bearing specimen carriage
  • Digital Section Counter Display
  • Touch Screen Control Panel with Easy to Clean Membrane Switches
  • Electronic Feed with Fast Return
  • Separate Trim Control Function with Footswitch
  • Preset Trim Setting for Fast Block Trimming
  • Removable Waste Tray


Series 300, motorized cutting stroke rotary microtome, basic unit.
Includes double footswitch control for trim & amp; cut functions.
Manual or motorized cutting stroke with balanced handwheel. Retraction on return stroke.
Motorized cutting speed range 0-400mm/sec


  • Rapid trim function
  • Positive mechanical lock on handwheel
  • Specimen orientation
  • Specimen rotation
  • Digital section counter display on front panel
  • Supplied complete with the following:
  • Section waste tray
  • Instruction manual


  • Maximum specimen size 55x50mm
  • Cutting stroke: 64mm
  • Retraction: 70microns
  • Motorized feed: 28mm
  • Handwheel Lock: Positive lock at 12:00 o’clock or 6:00 o’clock position by pulling out black handwheel lock
    knob on left side of microtome.
  • Specimen Orientation: x and y axis with 8 × tilt plus rotation
  • Section thickness range: 0.5 to 60microns
  • Section thickness increments: 0.5 to 2microns in 0.5micron steps
  • 2.0 to 10 microns in 1 micron steps
  • 10 to 20 microns in 2 micron steps
  • 20 to 60 microns in 5 micron steps
  • Dimensions: H-279mm x W-273mm x L-457mm Weight – 24.3 kg (53.6 lbs)

100-240 Vac 50/60 Hz 0.8 Amps power input
24 Vdc, 36 Watts power output
UL, CSA, CE approved DC solid state power supply



Comments are closed.